Tracy Gerstheimer

Kitchen cabinets

SW Repose Gray, Satin finish

Door and drawers

Remove doors and drawer fronts. Number each one for placement. Transport to our shop safely for preparation and painting

Clean each door and drawer with water and dawn dish soap to remove all oils, grime and grease. Vigorously sand each side with 120 grit sandpaper to remove smooth finish so primer will adhere properly and wipe clean free of any dust. Apply 1 coat of Sherwin Williams Pro Block oil base primer. Let primer cure for 10 hours. Lightly sand, clean and then apply 2 coats of Sherwin Williams Pro Classic satin paint


Base cabinets

Please remove all items from inside cabinets, countertops and above cabinets

We will mask and plastic off all door and drawer fronts, walls, countertops, appliances and floors to create an on-site paint booth. There will be (1) temporary plastic sheet wall to contain dust while sanding. We will have a fan, filter and vent hose out the window to remove fumes.

Clean each base cabinet to remove any dirt or grease. Vigorously sand base cabinets with 120 grit sandpaper to remove smooth finish so primer will adhere properly and wipe clean free of any dust. Apply 1 coat of Sherwin Williams Pro Block oil base flat primer. Let primer cure for 10 hours. Lightly sand, then apply 2 coats of Sherwin Williams Pro Classic satin paint


We only paint to inside lip of the cabinets and will not be painting inside cabinets or shelves.

Once base cabinets are complete. We will transport doors and drawer fronts back to jobsite for installation using original hardware

Thank you